The RTP manufacturing process is:

point A fully integrated, turn-key manufacturing system
point All equipment & software universal with worldwide partners
point All CNC equipment connected by ISDN to Germany
point Real-time troubleshooting and system upgrades
plastic housing enclosures
MACHINING

point High Speed CNC routing
point +/-.2mm tolerances <250mm & +/-.4mm between 250 & 900mm
point proprietary sub-routines to increase efficiency
point optimised for clean edge cuts
point no part clean-up required
point tracking, nesting, yields
machining plastic enclosures

FACETTING

point 5mm to 3mm radii and chamfers
point +/-.1mm feature tolerance
point removes extruded texture
point also used as secondary operations to add details
SAWING

point Modified table saws
point +/-.2mm location tolerance
point +/-.1mm feature tolerance
point bending details, tongues & grooves
point add secondary features
sawing plastic enclosures
BENDING

point CNC Heat Bender
point up to 1000mm long bend
point up to 99 pre-programmed bends
point free standing bend tolerance +/-2 degrees
point captured bend tolerance +/-.5 degrees
bending plastic enclosures
ASSEMBLING

point All joints tongue & groove or recess/pocketed & solvent bonded
point all interfaces CNC controlled
point no jigging, fixturing or measuring
point solvent creates chemical weld
point big boy’s Lego" snap together
point semi-automatic, precision dispensers
plastic enclosure assembly

 

RTP are manufacturers of customised plastic enclosures and housing in small to medium production runs.
RTP's plastic housings do not require moulds or tooling for product development or manufacture, making them a very cost effective solution.
We will work with you from project design to delivery of the final ready-to-use product.

| About RTP | Links | Sitemap | Privacy Statement | © RTP Trading 2010